What Kind of Radon Reduction System is Best?

radon-reduction-system-drawing-typical-9-sep-2016a_orig

What is the best Radon Reduction System for my house?

Your house type will affect the kind of radon reduction system that will work best. Houses are generally categorized according to their foundation design. For example: basement, slab-on-grade (concrete poured at ground level), or crawlspace (a shallow unfinished space under the first floor). Some houses have more than one foundation design feature. For instance, it is common to have a basement under part of the house and to have a slab-on-grade or crawlspace under the rest of the house. In these situations a combination of radon reduction techniques may be needed to reduce radon levels to below 4 pCi/L. Radon reduction systems can be grouped by house foundation design.

Best Radon Reduction System for Basement or Slab-on-grade Foundation

In houses that have a basement or a slab-on-grade foundation, radon is usually reduced by one of four types of soil suction: subslab suction, drain tile suction, sump hole suction, or block wall suction. Active subslab suction (also called subslab depressurization) is the most common and usually the most reliable radon reduction method. One or more suction pipes are inserted through the floor slab into the crushed rock or soil underneath. They also may be inserted below the concrete slab from outside the house. The number and location of suction pipes that are needed depends on how easily air can move in the crushed rock or soil under the slab, and on the strength of the radon source. Often, only a single suction point is needed.

How does a contractor know what radon reduction system is best?

A contractor usually gets this information from visual inspection, from diagnostic tests, and/or from experience. A radon vent fan connected to the suction pipe(s) draws the radon gas from below the house and releases it into the outdoor air while simultaneously creating a negative pressure (vacuum) beneath the slab. Common fan locations include unconditioned house and garage spaces, including attics, and the exterior of the house.

Best Radon Reduction System for a Crawlspace

An effective method to reduce radon levels in crawlspace houses involves covering the earth floor with a high-density plastic sheet. A vent pipe and fan are used to draw the radon from under the sheet and vent it to the outdoors. This form of soil suction is called submembrane suction, and when properly applied is the most effective way to reduce radon levels in crawlspace houses. Another less-favorable option is active crawlspace depressurization which involves drawing air directly from the crawlspace using a fan. This technique generally does not work as well as submembrane suction and requires special attention to combustion appliance backdrafting and sealing the crawlspace from other portions of the house, and may also result in increased energy costs due to loss of conditioned air from the house.

Knowing what the right system is for your home can be challenging. At Trinity Electrical & Radon Mitigation, we will work with you to determine the most effective system to help keep your family safe. Give us a call at 630-499-1492


"The technicians at Trinity services were extremely professional. It was a pleasure to open up our home to them. My wife and I were extremely impressed with how neat and clean they worked. A lot of contractors just don't care, but I could tell that Trinity was not one of those...

Bruce - Naperville, IL
Read more Testimonials